Model-specific reset guide
Ponastavitev števca odpadnega črnila na tiskalniku Epson WF-2520
Epson WF-2520 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Why Epson WF-2520 stops printing
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson WF-2520 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson WF-2520. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson WF-2520
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for WF-2520 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson WF-2520 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WF-2520.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson WF-2520 is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Install the original Epson driver for WF-2520; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
Epson WF-2520 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson WF-2520 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson WF-2520
A direct USB connection, the correct driver and a valid key are all you need to reset Epson WF-2520.