Epson TX659 Ink Pad Counter Reset Guide

Epson TX659 Waste Ink Counter Reset

The Epson TX659 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson TX659 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson TX659 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson TX659 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson TX659 Waste Counter Reset

  1. 1. korak: Connect Epson TX659 to a Windows computer with a stable Internet connection using a USB cable.
  2. 2. korak: Start Wic Reset Connect in Administrator mode and wait until Epson TX659 appears in the device list.
  3. 3. korak: Use the key to reset the counter, wait for completion, then restart Epson TX659 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Navodila

Most Epson TX659 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

Troubleshooting

  • Temporarily disable VPN/proxy if validation fails.
  • Close Epson Status Monitor or other printer utilities.
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).
  • Use a direct USB connection (avoid hubs).

FAQ

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson TX659 – Waste Ink Counter Reset using Wic Reset Connect.

Nakupovalna košarica