Epson NX409 Ink Pad Counter Reset Guide

Epson NX409 Waste Ink Counter Reset

The Epson NX409 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson NX409 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson NX409 Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson NX409 waste counter reset in minutes.

Three Steps to Restore Epson NX409 Printing

  1. 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson NX409 via USB (Wi-Fi reset is not supported).
  2. 2. korak: Run Wic Reset Connect as Administrator and confirm Epson NX409 is detected.
  3. 3. korak: Paste the reset key, click Reset, and after completion power-cycle Epson NX409.
Buy Reset Key ⬇️ Download Wic Reset Connect Navodila

Most Epson NX409 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

Troubleshooting

  • Use a direct USB connection (avoid hubs).
  • Close Epson Status Monitor or other printer utilities.
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.

FAQ

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson NX409 – Waste Ink Counter Reset using Wic Reset Connect.

Nakupovalna košarica