Epson L395 Ink Pad Counter Reset Guide

Epson L395 Waste Ink Counter Reset

When the Epson L395 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L395 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson L395 Waste Ink Counter

Most Epson L395 waste ink counter locks are solved by a software counter reset. Wic Reset Connect omogoča enostaven postopek.

Pogosti simptomi

‘Sporočilo ’Service Required" / življenjska doba v gonilniku ali pripomočku
Koda za vzdrževanje/podporo (razlikuje se glede na model/voznik)
Tiskanje se ustavi po ciklih čiščenja
Opozorilo se ponovi po ponovnem zagonu tiskalnika

Reset Epson L395 Waste Ink Counter in 3 Steps

1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson L395 via USB (Wi-Fi reset is not supported).
2. korak: Spustite Wic Reset Connect as Administrator and confirm Epson L395 is detected.
3. korak: Use the key to reset the counter, wait for completion, then restart Epson L395 to finalize.

Nakup ključa za ponastavitev ⬇️ Prenos Wic Ponastavitev povezave Navodila

Most Epson L395 waste counter resets finish in ~1–2 minutes.

Pogosto zastavljena vprašanja

Ali potrebujem servisni center?

Običajno ne za zaklep števca za odpadno črnilo; ponavadi zadostuje ponastavitev.

Koliko časa traja?

Običajno približno 1-2 minuti.

Ali lahko ponastavitev izvedem prek omrežja Wi-Fi?

Ne. Ponastavitev zahteva povezavo USB z računalnikom Windows.

Kaj če ponastavitev ne deluje?

Preverite kabel/port USB, zaženite ga kot upravitelj in zaprite druge pripomočke za tiskalnik.

Guide prepared for Epson L395 – Waste Ink Counter Reset using Wic Reset Connect.