Epson L3255 Waste Ink Counter Reset
The Epson L3255 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3255 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why the Epson L3255 Stops Printing (Waste Counter Limit)
Most Epson L3255 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.
Typical Signs
- ‘Service Required’ / service life message in driver or utility
- Maintenance/support code (varies by model/driver)
- Printing stops after cleaning cycles
- Warning repeats after restarting the printer
Reset Epson L3255 Waste Ink Counter in 3 Steps
- 1. korak: Connect Epson L3255 to a Windows computer with a stable Internet connection using a USB cable.
- 2. korak: Start Wic Reset Connect in Administrator mode and wait until Epson L3255 appears in the device list.
- 3. korak: Use the key to reset the counter, wait for completion, then restart Epson L3255 to finalize.
Most Epson L3255 waste counter resets finish in ~1–2 minutes.
System Requirements
- Valid Wic Reset Connect reset key
- Windows 7/8/10/11 PC
- USB connection required (Wi-Fi reset not supported)
- Stable Internet connection during reset
Frequently Asked Questions
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Guide prepared for Epson L3255 – Waste Ink Counter Reset using Wic Reset Connect.