Epson L3115 Waste Ink Counter Reset

If your Epson L3115 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3115 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson L3115 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson L3115 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Step-by-Step: Epson L3115 Waste Counter Reset

1. 1. korak: Prepare a Windows PC + USB cable and connect Epson L3115 directly. Keep Internet enabled for validation.
2. 2. korak: Run Wic Reset Connect as Administrator and confirm Epson L3115 is detected.
3. 3. korak: Paste the reset key, click Reset, and after completion power-cycle Epson L3115.

Most Epson L3115 waste counter resets finish in ~1–2 minutes.

What You Need

• Windows 7/8/10/11 PC
• Valid Wic Reset Connect reset key
• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)

Common Fixes

• Try another USB cable (some cables are charge-only).
• Restart printer and PC, then try again.
• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Close Epson Status Monitor or other printer utilities.

Frequently Asked Questions