Model-specific reset guide
Epson ET-2726 Reset Waste Ink Counter
The service-required message on Epson ET-2726 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
What the Epson ET-2726 service message means
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson ET-2726 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect is designed to reset the compatible counter in Epson ET-2726. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ET-2726
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for ET-2726 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ET-2726 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2726.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ET-2726 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for ET-2726; a generic Windows driver may not expose the required communication interface.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
Epson ET-2726 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson ET-2726 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson ET-2726
Complete the Epson ET-2726 counter reset with Wic Reset Connect and assistance whenever you need it.