Model-specific reset guide
Canon TS3400 Ink Absorber Full Reset
When Canon TS3400 reports that the ink absorber is full, turning it off and on will not normally remove the lock. The printer must be prepared correctly and its counter reset.
What stops Canon TS3400 from printing
The lock is based on accumulated maintenance activity. Resetting Canon TS3400 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect is designed to reset the compatible counter in Canon TS3400. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TS3400
- Turn the printer off.
- Pritisnite in pridržite Ustavitev/ponastavitev.
- Medtem ko držite Stop/Reset, pritisnite in držite Napajanje.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5-krat.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TS3400
The counter reset normally takes only a few minutes after Canon TS3400 has entered service mode successfully.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TS3400 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TS3400 is not detected
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
Canon TS3400 reset FAQ
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Kolikokrat naj pritisnem Stop/Reset?
For Canon TS3400, use 5 Stop/Reset presses in the sequence shown on this page.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon TS3400
Use the correct sequence for Canon TS3400 and restore printing without an unnecessary service visit.