Model-specific reset guide
Canon TR6060 Ink Absorber Full Reset
If Canon TR6060 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.
Before resetting Canon TR6060
The absorber pads collect ink generated during print-head cleaning. Canon TR6060 tracks those maintenance cycles in memory rather than measuring the pads directly.
Wic Reset Connect is designed to reset the compatible counter in Canon TR6060. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TR6060
- Turn the printer off.
- Pritisnite in pridržite Ustavitev/ponastavitev.
- Medtem ko držite Stop/Reset, pritisnite in držite Napajanje.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5-krat.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TR6060
First make sure the power indicator is steady and no cartridge or mechanical error is active. Then prepare the Windows computer and direct USB connection.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TR6060 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TR6060 is not detected
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- Connect Canon TR6060 directly to the computer and try another data-capable USB cable or port.
Canon TR6060 reset FAQ
Does Canon TR6060 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Kolikokrat naj pritisnem Stop/Reset?
For Canon TR6060, use 5 Stop/Reset presses in the sequence shown on this page.
Restore Canon TR6060
Use the correct sequence for Canon TR6060 and restore printing without an unnecessary service visit.