Model-specific reset guide
Canon TR5090 Ink Absorber Full Reset
The waste ink system in Canon TR5090 collects ink used during cleaning cycles. Once the estimated limit is reached, service mode and a compatible counter reset may be required.
The waste ink counter inside Canon TR5090
Cleaning operations send unused ink into absorber pads inside the printer. Canon TR5090 estimates their usage with an electronic counter and can lock printing when that value reaches its limit.
Wic Reset Connect is designed to reset the compatible counter in Canon TR5090. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TR5090
- Turn the printer off.
- Pritisnite in pridržite Ustavitev/ponastavitev.
- Medtem ko držite Stop/Reset, pritisnite in držite Napajanje.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5-krat.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TR5090
First make sure the power indicator is steady and no cartridge or mechanical error is active. Then prepare the Windows computer and direct USB connection.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TR5090 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TR5090 is not detected
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Connect Canon TR5090 directly to the computer and try another data-capable USB cable or port.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
Canon TR5090 reset FAQ
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Kolikokrat naj pritisnem Stop/Reset?
For Canon TR5090, use 5 Stop/Reset presses in the sequence shown on this page.
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Restore Canon TR5090
Follow the verified steps for Canon TR5090, then restart the printer and return to normal operation.