Epson WF-7515 Waste Ink Counter Reset

When the Epson WF-7515 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson WF-7515 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson WF-7515 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson WF-7515 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Step-by-Step: Epson WF-7515 Waste Counter Reset

Pasul 1: Prepare a Windows PC + USB cable and connect Epson WF-7515 directly. Keep Internet enabled for validation.
Pasul 2: Run Wic Reset Connect as Administrator and confirm Epson WF-7515 is detected.
Pasul 3: Use the key to reset the counter, wait for completion, then restart Epson WF-7515 to finalize.

Buy Reset Key ⬇️ Download Wic Reset Connect Instrucţiuni

Most Epson WF-7515 waste counter resets finish in ~1–2 minutes.

Troubleshooting

Close Epson Status Monitor or other printer utilities.
Try another USB cable (some cables are charge-only).
Temporarily disable VPN/proxy if validation fails.
Run the app as Administrator.
Restart printer and PC, then try again.

FAQ

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson WF-7515 – Waste Ink Counter Reset using Wic Reset Connect.