Epson TX235 Ink Pad Counter Reset Guide

Epson TX235 Waste Ink Counter Reset

The Epson TX235 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson TX235 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson TX235 Stops Printing (Waste Counter Limit)

Most Epson TX235 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Reset Epson TX235 Waste Ink Counter in 3 Steps

Pasul 1: Prepare a Windows PC + USB cable and connect Epson TX235 directly. Keep Internet enabled for validation.
Pasul 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson TX235.
Pasul 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson TX235.

Buy Reset Key ⬇️ Download Wic Reset Connect Instrucţiuni

Most Epson TX235 waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

Use a direct USB connection (avoid hubs).
Restart printer and PC, then try again.
Run the app as Administrator.
Close Epson Status Monitor or other printer utilities.
Try another USB cable (some cables are charge-only).

FAQ

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

How long does it take?

Usually about 1–2 minutes.

Guide prepared for Epson TX235 – Waste Ink Counter Reset using Wic Reset Connect.