Reset Epson ET-2825 Waste Ink Counter in Minutes

Epson ET-2825 Waste Ink Counter Reset

The Epson ET-2825 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson ET-2825 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson ET-2825 Stops Printing (Waste Counter Limit)

Most Epson ET-2825 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Step-by-Step: Epson ET-2825 Waste Counter Reset

  1. Pasul 1: Connect Epson ET-2825 to a Windows computer with a stable Internet connection using a USB cable.
  2. Pasul 2: Run Wic Reset Connect as Administrator and confirm Epson ET-2825 is detected.
  3. Pasul 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ET-2825.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrucţiuni

Most Epson ET-2825 waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson ET-2825 – Waste Ink Counter Reset using Wic Reset Connect.

Cărucior de cumpărături