Epson EP-805A Waste Ink Counter Reset
When the Epson EP-805A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
A waste ink counter in the Epson EP-805A accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
Understanding the Epson EP-805A Waste Ink Counter
Most Epson EP-805A waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.
Common Symptoms
- Printer refuses to print even with ink available
- Epson Status Monitor shows maintenance warning
- Blinking lights and blocked jobs
- Device is locked until reset is performed
Three Steps to Restore Epson EP-805A Printing
- Pasul 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-805A via USB (Wi-Fi reset is not supported).
- Pasul 2: Start Wic Reset Connect in Administrator mode and wait until Epson EP-805A appears in the device list.
- Pasul 3: Paste the reset key, click Reset, and after completion power-cycle Epson EP-805A.
Most Epson EP-805A waste counter resets finish in ~1–2 minutes.
Before You Begin
- Windows 7/8/10/11 PC
- Stable Internet connection during reset
- USB connection required (Wi-Fi reset not supported)
- Valid Wic Reset Connect reset key
Common Fixes
- Restart printer and PC, then try again.
- Try another USB cable (some cables are charge-only).
- Run the app as Administrator.
- Use a direct USB connection (avoid hubs).
- Close Epson Status Monitor or other printer utilities.
Frequently Asked Questions
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Guide prepared for Epson EP-805A – Waste Ink Counter Reset using Wic Reset Connect.