Epson DX9450 Ink Pad Counter Reset Guide

Epson DX9450 Waste Ink Counter Reset

If your Epson DX9450 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson DX9450 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson DX9450 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson DX9450 waste counter reset in minutes.

Three Steps to Restore Epson DX9450 Printing

  1. Pasul 1: Use a Windows PC (7–11) with Internet access. Connect Epson DX9450 via USB (Wi-Fi reset is not supported).
  2. Pasul 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson DX9450.
  3. Pasul 3: Paste the reset key, click Reset, and after completion power-cycle Epson DX9450.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrucţiuni

Most Epson DX9450 waste counter resets finish in ~1–2 minutes.

What You Need

  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson DX9450 – Waste Ink Counter Reset using Wic Reset Connect.

Cărucior de cumpărături