Fix Epson XP-455 Service Required – Waste Counter Reset

Epson XP-455 Waste Ink Counter Reset

The Epson XP-455 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson XP-455 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson XP-455 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson XP-455 waste counter reset in minutes.

How the Error Appears

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Epson XP-455 Ink Pad Counter Reset – Quick Steps

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-455 via USB (Wi-Fi reset is not supported).
Step 2: Run Wic Reset Connect as Administrator and confirm Epson XP-455 is detected.
Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-455.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson XP-455 waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

Restart printer and PC, then try again.
Close Epson Status Monitor or other printer utilities.
Run the app as Administrator.
Temporarily disable VPN/proxy if validation fails.
Try another USB cable (some cables are charge-only).

Frequently Asked Questions

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson XP-455 – Waste Ink Counter Reset using Wic Reset Connect.