How to Reset Epson WF-3620 Waste Ink Counter

Epson WF-3620 Waste Ink Counter Reset

The Epson WF-3620 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson WF-3620 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson WF-3620 Stops Printing (Waste Counter Limit)

Most Epson WF-3620 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Step-by-Step: Epson WF-3620 Waste Counter Reset

  1. Step 1: Connect Epson WF-3620 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson WF-3620 is detected.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson WF-3620 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson WF-3620 waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Use a direct USB connection (avoid hubs).
  • Try another USB cable (some cables are charge-only).
  • Restart printer and PC, then try again.
  • Temporarily disable VPN/proxy if validation fails.
  • Close Epson Status Monitor or other printer utilities.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson WF-3620 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart