Fix Epson T60 Service Required – Waste Counter Reset

Epson T60 Waste Ink Counter Reset

The Epson T60 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson T60 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson T60 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson T60 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson T60 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Connect Epson T60 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson T60 appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson T60.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson T60 waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.
  • Use a direct USB connection (avoid hubs).

FAQ

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson T60 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart