Epson R260 Waste Ink Counter Reset

The Epson R260 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson R260 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson R260 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson R260 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Reset Epson R260 Waste Ink Counter in 3 Steps

1. Step 1: Connect Epson R260 to a Windows computer with a stable Internet connection using a USB cable.
2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson R260 is detected.
3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson R260.

Most Epson R260 waste counter resets finish in ~1–2 minutes.

What You Need

• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)

Common Fixes

• Close Epson Status Monitor or other printer utilities.
• Try another USB cable (some cables are charge-only).
• Temporarily disable VPN/proxy if validation fails.
• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).

FAQ