Epson ET-2864 Waste Ink Counter Reset

The Epson ET-2864 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson ET-2864 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson ET-2864 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson ET-2864 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Step-by-Step: Epson ET-2864 Waste Counter Reset

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson ET-2864 via USB (Wi-Fi reset is not supported).
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2864.
Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-2864.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson ET-2864 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson ET-2864 – Waste Ink Counter Reset using Wic Reset Connect.