Epson ET-2714 Ink Pad Counter Reset Guide

Epson ET-2714 Waste Ink Counter Reset

The Epson ET-2714 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson ET-2714 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson ET-2714 Ink Pad Counter Warning?

Most Epson ET-2714 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Reset Epson ET-2714 Waste Ink Counter in 3 Steps

Step 1: Prepare a Windows PC + USB cable and connect Epson ET-2714 directly. Keep Internet enabled for validation.
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2714.
Step 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2714 to finalize.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson ET-2714 waste counter resets finish in ~1–2 minutes.

Before You Begin

Valid Wic Reset Connect reset key
Windows 7/8/10/11 PC
USB connection required (Wi-Fi reset not supported)
Stable Internet connection during reset

Common Fixes

Temporarily disable VPN/proxy if validation fails.
Run the app as Administrator.
Close Epson Status Monitor or other printer utilities.
Try another USB cable (some cables are charge-only).
Use a direct USB connection (avoid hubs).

FAQ

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson ET-2714 – Waste Ink Counter Reset using Wic Reset Connect.