Epson EP-M570T Waste Ink Counter Reset

The Epson EP-M570T delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-M570T uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson EP-M570T Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson EP-M570T waste counter reset in minutes.

Typical Signs

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Reset Epson EP-M570T Waste Ink Counter in 3 Steps

1. Step 1: Connect Epson EP-M570T to a Windows computer with a stable Internet connection using a USB cable.
2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson EP-M570T is detected.
3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson EP-M570T.

Most Epson EP-M570T waste counter resets finish in ~1–2 minutes.

Common Fixes

• Use a direct USB connection (avoid hubs).
• Temporarily disable VPN/proxy if validation fails.
• Try another USB cable (some cables are charge-only).
• Run the app as Administrator.
• Close Epson Status Monitor or other printer utilities.