MX416 Printer Reset – Ink Absorber Counter Explained

Canon MX416 Ink Absorber Full Reset

If your Canon MX416 suddenly refuses to print and shows a maintenance or service warning, the ink absorber counter may have reached its limit.

Ink absorber pads store waste ink during normal operation. Canon firmware tracks this using a software counter and may stop printing when it reaches the limit.

This page is prepared for Canon MX416. Service mode instructions are shown only when a matching series procedure is known.

What You May Notice

Service / maintenance warning on the screen or driver
Printer refuses to print even with ink available
Blinking lights and queued jobs fail
Error reappears after restart

Reset the Ink Absorber Counter

Completing the reset clears the internal ink absorber counter stored in printer memory and restores normal operation.

Important Notes

If absorber pads are truly saturated, ignoring maintenance can lead to ink leakage inside the printer. The counter reset only removes the software lock.

Need a reset solution?

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Use a reliable USB connection and follow the steps in order.

Troubleshooting

Close other Canon printer utilities while resetting.
Use the correct Stop/Reset press count for your series.
Repeat the service mode steps carefully (timing matters).
Power-cycle the printer and try again.
Try a different USB cable/port if using PC software.

FAQ

Does reset clean the absorber pads?

No. It resets the counter (software). Pads may still require physical maintenance in high-usage cases.

How many times should I press Stop/Reset?

It depends on the series. Many use 5 presses; PRO/imagePROGRAF/MG use 6 in this generator.

How long does it take?

Usually a few minutes once the correct steps are followed.

Does every Canon model need service mode?

No. The generator shows service mode steps only when the series procedure is known.

Guide prepared for Canon MX416 – Ink Absorber / Waste Ink Counter Reset using Wic Reset Connect.