Fix Epson XP-730 Service Required – Waste Counter Reset

Epson XP-730 Waste Ink Counter Reset

If your Epson XP-730 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson XP-730 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson XP-730 Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson XP-730 waste counter reset in minutes.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson XP-730 Waste Ink Counter in 3 Steps

  1. Stap 1: Connect Epson XP-730 to a Windows computer with a stable Internet connection using a USB cable.
  2. Stap 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-730.
  3. Stap 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-730.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructies

Most Epson XP-730 waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson XP-730 – Waste Ink Counter Reset using Wic Reset Connect.

Winkelwagen