Fix Epson TX550W Service Required – Waste Counter Reset

Epson TX550W Waste Ink Counter Reset

The Epson TX550W is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson TX550W accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson TX550W Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson TX550W waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson TX550W Printing

  1. Stap 1: Use a Windows PC (7–11) with Internet access. Connect Epson TX550W via USB (Wi-Fi reset is not supported).
  2. Stap 2: Start Wic Reset Connect in Administrator mode and wait until Epson TX550W appears in the device list.
  3. Stap 3: Use the key to reset the counter, wait for completion, then restart Epson TX550W to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructies

Most Epson TX550W waste counter resets finish in ~1–2 minutes.

What You Need

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson TX550W – Waste Ink Counter Reset using Wic Reset Connect.

Winkelwagen