Epson XP-610 Ink Pad Counter Reset Guide

Epson XP-610 Waste Ink Counter Reset

The Epson XP-610 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-610 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson XP-610 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson XP-610 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Epson XP-610 Ink Pad Counter Reset – Quick Steps

Step 1: Prepare a Windows PC + USB cable and connect Epson XP-610 directly. Keep Internet enabled for validation.
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-610.
Step 3: Use the key to reset the counter, wait for completion, then restart Epson XP-610 to finalize.

Buy Reset Key ⬇️ Download Wic Reset Connect 使用方法

Most Epson XP-610 waste counter resets finish in ~1–2 minutes.

What You Need

Windows 7/8/10/11 PC
Stable Internet connection during reset
Valid Wic Reset Connect reset key
USB connection required (Wi-Fi reset not supported)

FAQ

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson XP-610 – Waste Ink Counter Reset using Wic Reset Connect.