Epson XP-101 Ink Pad Counter Reset Guide

Epson XP-101 Waste Ink Counter Reset

The Epson XP-101 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-101 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-101 Stops Printing (Waste Counter Limit)

Most Epson XP-101 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Three Steps to Restore Epson XP-101 Printing

Step 1: Connect Epson XP-101 to a Windows computer with a stable Internet connection using a USB cable.
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-101.
Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-101.

Buy Reset Key ⬇️ Download Wic Reset Connect 使用方法

Most Epson XP-101 waste counter resets finish in ~1–2 minutes.

Common Fixes

Close Epson Status Monitor or other printer utilities.
Run the app as Administrator.
Use a direct USB connection (avoid hubs).
Temporarily disable VPN/proxy if validation fails.
Restart printer and PC, then try again.

Frequently Asked Questions

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-101 – Waste Ink Counter Reset using Wic Reset Connect.