Epson XP-101 Waste Ink Counter Reset

The Epson XP-101 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-101 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-101 Stops Printing (Waste Counter Limit)

Most Epson XP-101 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Tipični znakovi

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Three Steps to Restore Epson XP-101 Printing

1. Korak 1: Connect Epson XP-101 to a Windows computer with a stable Internet connection using a USB cable.
2. Korak 2: Otvoreno Wic Reset Connect with admin privileges and verify device recognition for Epson XP-101.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson XP-101.

Most Epson XP-101 waste counter resets finish in ~1–2 minutes.

Uobičajena rješenja

• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Pokrenite aplikaciju kao administrator.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.

Često postavljana pitanja