Epson TX210 Ink Pad Counter Reset Guide

Epson TX210 Waste Ink Counter Reset

The Epson TX210 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson TX210 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson TX210 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson TX210 waste counter reset in minutes.

How the Error Appears

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Step-by-Step: Epson TX210 Waste Counter Reset

Step 1: Connect Epson TX210 to a Windows computer with a stable Internet connection using a USB cable.
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson TX210.
Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson TX210.

Buy Reset Key ⬇️ Download Wic Reset Connect 使用方法

Most Epson TX210 waste counter resets finish in ~1–2 minutes.

System Requirements

Stable Internet connection during reset
USB connection required (Wi-Fi reset not supported)
Windows 7/8/10/11 PC
Valid Wic Reset Connect reset key

Common Fixes

Use a direct USB connection (avoid hubs).
Restart printer and PC, then try again.
Close Epson Status Monitor or other printer utilities.
Run the app as Administrator.
Try another USB cable (some cables are charge-only).

FAQ

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

How long does it take?

Usually about 1–2 minutes.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson TX210 – Waste Ink Counter Reset using Wic Reset Connect.