Reset Epson SX235W Waste Ink Counter in Minutes

Epson SX235W Waste Ink Counter Reset

The Epson SX235W delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson SX235W accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson SX235W Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson SX235W waste counter reset in minutes.

Epson SX235W Ink Pad Counter Reset – Quick Steps

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson SX235W via USB (Wi-Fi reset is not supported).
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson SX235W.
Step 3: Use the key to reset the counter, wait for completion, then restart Epson SX235W to finalize.

Buy Reset Key ⬇️ Download Wic Reset Connect 使用方法

Most Epson SX235W waste counter resets finish in ~1–2 minutes.

Before You Begin

Valid Wic Reset Connect reset key
Stable Internet connection during reset
Windows 7/8/10/11 PC
USB connection required (Wi-Fi reset not supported)

If the Printer Is Not Detected

Try another USB cable (some cables are charge-only).
Temporarily disable VPN/proxy if validation fails.
Use a direct USB connection (avoid hubs).
Run the app as Administrator.
Close Epson Status Monitor or other printer utilities.

FAQ

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson SX235W – Waste Ink Counter Reset using Wic Reset Connect.