Fix Epson RX650 Service Required – Waste Counter Reset

Epson RX650 Waste Ink Counter Reset

The Epson RX650 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson RX650 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson RX650 Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson RX650 waste counter reset in minutes.

Typical Signs

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Step-by-Step: Epson RX650 Waste Counter Reset

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson RX650 via USB (Wi-Fi reset is not supported).
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson RX650.
Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson RX650.

Buy Reset Key ⬇️ Download Wic Reset Connect 使用方法

Most Epson RX650 waste counter resets finish in ~1–2 minutes.

Troubleshooting

Use a direct USB connection (avoid hubs).
Try another USB cable (some cables are charge-only).
Run the app as Administrator.
Temporarily disable VPN/proxy if validation fails.
Restart printer and PC, then try again.

Frequently Asked Questions

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson RX650 – Waste Ink Counter Reset using Wic Reset Connect.