How to Reset Epson WF-7010 Waste Ink Counter

Epson WF-7010 Waste Ink Counter Reset

The Epson WF-7010 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson WF-7010 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson WF-7010 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson WF-7010 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson WF-7010 Waste Counter Reset

  1. Fase 1: Connect Epson WF-7010 to a Windows computer with a stable Internet connection using a USB cable.
  2. Fase 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson WF-7010.
  3. Fase 3: Use the key to reset the counter, wait for completion, then restart Epson WF-7010 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Istruzioni

Most Epson WF-7010 waste counter resets finish in ~1–2 minutes.

What You Need

  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson WF-7010 – Waste Ink Counter Reset using Wic Reset Connect.

Carrello della spesa