Epson PX-404A Ink Pad Counter Reset Guide

Epson PX-404A Waste Ink Counter Reset

The Epson PX-404A delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson PX-404A tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson PX-404A Show ‘Service Required’?

Most Epson PX-404A waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Reset Epson PX-404A Waste Ink Counter in 3 Steps

  1. Fase 1: Prepare a Windows PC + USB cable and connect Epson PX-404A directly. Keep Internet enabled for validation.
  2. Fase 2: Run Wic Reset Connect as Administrator and confirm Epson PX-404A is detected.
  3. Fase 3: Use the key to reset the counter, wait for completion, then restart Epson PX-404A to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Istruzioni

Most Epson PX-404A waste counter resets finish in ~1–2 minutes.

System Requirements

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson PX-404A – Waste Ink Counter Reset using Wic Reset Connect.

Carrello della spesa