How to Reset Epson L4266 Waste Ink Counter

Epson L4266 Waste Ink Counter Reset

When the Epson L4266 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L4266 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson L4266 Waste Ink Counter

Most Epson L4266 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson L4266 Waste Ink Counter in 3 Steps

  1. Fase 1: Use a Windows PC (7–11) with Internet access. Connect Epson L4266 via USB (Wi-Fi reset is not supported).
  2. Fase 2: Start Wic Reset Connect in Administrator mode and wait until Epson L4266 appears in the device list.
  3. Fase 3: Paste the reset key, click Reset, and after completion power-cycle Epson L4266.
Buy Reset Key ⬇️ Download Wic Reset Connect Istruzioni

Most Epson L4266 waste counter resets finish in ~1–2 minutes.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L4266 – Waste Ink Counter Reset using Wic Reset Connect.

Carrello della spesa