How to Reset Epson ET-2875 Waste Ink Counter

Epson ET-2875 Waste Ink Counter Reset

The Epson ET-2875 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2875 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson ET-2875 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ET-2875 waste counter reset in minutes.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson ET-2875 Waste Counter Reset

  1. Fase 1: Prepare a Windows PC + USB cable and connect Epson ET-2875 directly. Keep Internet enabled for validation.
  2. Fase 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2875.
  3. Fase 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-2875.
Buy Reset Key ⬇️ Download Wic Reset Connect Istruzioni

Most Epson ET-2875 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson ET-2875 – Waste Ink Counter Reset using Wic Reset Connect.

Carrello della spesa