Epson EP-805A Waste Ink Counter Reset

When the Epson EP-805A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson EP-805A accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson EP-805A Waste Ink Counter

Most Epson EP-805A waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Three Steps to Restore Epson EP-805A Printing

1. Fase 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-805A via USB (Wi-Fi reset is not supported).
2. Fase 2: Start Wic Reset Connect in Administrator mode and wait until Epson EP-805A appears in the device list.
3. Fase 3: Paste the reset key, click Reset, and after completion power-cycle Epson EP-805A.

Most Epson EP-805A waste counter resets finish in ~1–2 minutes.

Before You Begin

• Windows 7/8/10/11 PC
• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key

Common Fixes

• Restart printer and PC, then try again.
• Try another USB cable (some cables are charge-only).
• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Close Epson Status Monitor or other printer utilities.

Frequently Asked Questions