Epson CX9300F Ink Pad Counter Reset Guide

Epson CX9300F Waste Ink Counter Reset

The Epson CX9300F is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson CX9300F tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson CX9300F Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson CX9300F waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson CX9300F Waste Ink Counter in 3 Steps

  1. Fase 1: Connect Epson CX9300F to a Windows computer with a stable Internet connection using a USB cable.
  2. Fase 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson CX9300F.
  3. Fase 3: Paste the reset key, click Reset, and after completion power-cycle Epson CX9300F.
Buy Reset Key ⬇️ Download Wic Reset Connect Istruzioni

Most Epson CX9300F waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Close Epson Status Monitor or other printer utilities.
  • Use a direct USB connection (avoid hubs).
  • Run the app as Administrator.
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson CX9300F – Waste Ink Counter Reset using Wic Reset Connect.

Carrello della spesa