Epson XP-620 Waste Ink Counter Reset

When the Epson XP-620 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-620 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-620 Stops Printing (Waste Counter Limit)

Kunjungan servis sering kali tidak diperlukan. Wic Reset Connect allows a safe Epson XP-620 waste counter reset in minutes.

Tanda-tanda Khas

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Epson XP-620 Ink Pad Counter Reset – Quick Steps

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-620 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson XP-620.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson XP-620 to finalize.

Most Epson XP-620 waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Windows 7/8/10/11 PC
• Koneksi Internet stabil selama pengaturan ulang

Pemecahan masalah

• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Jalankan aplikasi sebagai Administrator.
• Gunakan koneksi USB langsung (hindari hub).

Pertanyaan yang Sering Diajukan