Epson XP-411 Ink Pad Counter Reset Guide

Epson XP-411 Waste Ink Counter Reset

When the Epson XP-411 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson XP-411 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson XP-411 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson XP-411 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson XP-411 Waste Counter Reset

  1. Step 1: Connect Epson XP-411 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-411 appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-411.
Buy Reset Key ⬇️ Download Wic Reset Connect Petunjuk

Most Epson XP-411 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson XP-411 – Waste Ink Counter Reset using Wic Reset Connect.

Keranjang Belanja