Fix Epson XP-230 Service Required – Waste Counter Reset

Epson XP-230 Waste Ink Counter Reset

When the Epson XP-230 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson XP-230 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson XP-230 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson XP-230 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson XP-230 Waste Ink Counter in 3 Steps

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson XP-230 directly. Keep Internet enabled for validation.
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-230 appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-230.
Buy Reset Key ⬇️ Download Wic Reset Connect Petunjuk

Most Epson XP-230 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-230 – Waste Ink Counter Reset using Wic Reset Connect.

Keranjang Belanja