Epson XP-206 Waste Ink Counter Reset

If your Epson XP-206 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson XP-206 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson XP-206 Ink Pad Counter Warning?

Dengan Wic Reset Connect, you can reset the Epson XP-206 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Three Steps to Restore Epson XP-206 Printing

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-206 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson XP-206.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson XP-206 to finalize.

Most Epson XP-206 waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Windows 7/8/10/11 PC
• Koneksi Internet stabil selama pengaturan ulang
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)

Perbaikan Umum

• Jalankan aplikasi sebagai Administrator.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Tutup Epson Status Monitor atau utilitas printer lainnya.

PERTANYAAN YANG SERING DIAJUKAN