Epson TX435W Waste Ink Counter Reset

If your Epson TX435W suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson TX435W uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson TX435W Waste Ink Counter

Dengan Wic Reset Connect, you can reset the Epson TX435W waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson TX435W Ink Pad Counter Reset – Quick Steps

1. Langkah 1: Prepare a Windows PC + USB cable and connect Epson TX435W directly. Keep Internet enabled for validation.
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson TX435W is detected.
3. Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson TX435W.

Most Epson TX435W waste counter resets finish in ~1–2 minutes.

Jika Printer Tidak Terdeteksi

• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Jalankan aplikasi sebagai Administrator.
• Gunakan koneksi USB langsung (hindari hub).
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Tutup Epson Status Monitor atau utilitas printer lainnya.