Epson TX130 Waste Ink Counter Reset

The Epson TX130 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson TX130 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson TX130 Waste Ink Counter

Most Epson TX130 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Bagaimana Kesalahan Muncul

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Step-by-Step: Epson TX130 Waste Counter Reset

1. Langkah 1: Connect Epson TX130 to a Windows computer with a stable Internet connection using a USB cable.
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson TX130 is detected.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson TX130 to finalize.

Most Epson TX130 waste counter resets finish in ~1–2 minutes.

Jika Printer Tidak Terdeteksi

• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Gunakan koneksi USB langsung (hindari hub).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.