Epson T10 Waste Ink Counter Reset

When the Epson T10 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson T10 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson T10 Waste Ink Counter

Dengan Wic Reset Connect, you can reset the Epson T10 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Bagaimana Kesalahan Muncul

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Step-by-Step: Epson T10 Waste Counter Reset

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson T10 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson T10.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson T10 to finalize.

Most Epson T10 waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

• Windows 7/8/10/11 PC
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Koneksi Internet stabil selama pengaturan ulang
• Tombol reset Wic Reset yang valid Hubungkan tombol reset

Perbaikan Umum

• Jalankan aplikasi sebagai Administrator.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Gunakan koneksi USB langsung (hindari hub).
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.

PERTANYAAN YANG SERING DIAJUKAN