Epson S21 Waste Ink Counter Reset

The Epson S21 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson S21 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson S21 Show ‘Service Required’?

Kunjungan servis sering kali tidak diperlukan. Wic Reset Connect allows a safe Epson S21 waste counter reset in minutes.

Tanda-tanda Khas

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Step-by-Step: Epson S21 Waste Counter Reset

1. Langkah 1: Prepare a Windows PC + USB cable and connect Epson S21 directly. Keep Internet enabled for validation.
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson S21.
3. Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson S21.

Most Epson S21 waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Windows 7/8/10/11 PC
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Koneksi Internet stabil selama pengaturan ulang

Pemecahan masalah

• Gunakan koneksi USB langsung (hindari hub).
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Jalankan aplikasi sebagai Administrator.