Panduan reset khusus model

Mengatur Ulang Penghitung Tinta Limbah pada Epson L3256

When Epson L3256 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

Kunci reset$8,00
Pengiriman email instanTermasuk dukungan teknisKunci pengganti setelah reset gagal
Masalahnya

Before resetting Epson L3256

Epson L3256 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.

Wic Reset Connect dirancang untuk mereset penghitung yang kompatibel pada Epson L3256. Sistem tinta buangan fisik tetap harus diperiksa dan dirawat bila diperlukan.

Windows 7–11PC atau laptop
USB langsungTanpa Wi-Fi atau hub
InternetUntuk validasi kunci
Kunci resetUntuk operasi ini
Langkah demi langkah

Reset the counter in Epson L3256

Siapkan komputer dan koneksi terlebih dahulu. Sebagian besar upaya yang tidak berhasil disebabkan oleh driver asli yang belum terpasang, koneksi USB tidak langsung, atau utilitas Epson lain yang sedang menggunakan printer.

  1. Instal driver asli

    Install the official Epson driver for L3256 and confirm that Windows can see the printer.

  2. Hubungkan langsung melalui USB

    Connect Epson L3256 to the computer without Wi-Fi, a hub or an adapter.

  3. Mulai Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3256.

  4. Masukkan kunci dan reset

    Masukkan kunci yang dibeli, pilih Reset, dan biarkan printer tetap terhubung hingga selesai.

Selesaikan dengan benar: Do not disconnect the cable while the reset is running. Restart Epson L3256 only after Wic Reset Connect reports that the operation is complete.
If Epson L3256 is not detected
  • Install the original Epson driver for L3256; a generic Windows driver may not expose the required communication interface.
  • Coba port USB lain dan kabel USB yang diketahui mendukung transfer data jika printer tidak terdeteksi.
  • Tutup Epson Status Monitor dan perangkat lunak pemeliharaan Epson lainnya sebelum memulai Wic Reset Connect.
  • Jalankan Wic Reset Connect sebagai Administrator dan pastikan koneksi internet tetap aktif selama proses validasi.

Buka petunjuk lengkap

Pertanyaan umum

Epson L3256 reset FAQ

Berapa lama proses reset berlangsung?

Proses reset itu sendiri biasanya selesai dalam sekitar 1–2 menit setelah printer terdeteksi dengan benar.

Bagaimana jika percobaan pengaturan ulang pertama gagal?

Perbaiki masalah driver atau komunikasi USB terlebih dahulu. Jika kunci telah digunakan, gunakan generator kunci baru atau hubungi dukungan.

Can I reset Epson L3256 over Wi-Fi?

Tidak. Wic Reset Connect memerlukan koneksi USB langsung ke komputer Windows.

Reset dengan percaya diri

Restore Epson L3256

Complete the Epson L3256 counter reset with Wic Reset Connect and assistance whenever you need it.

Kunci reset: $8,00
Keranjang Belanja
Pilih mata uang Anda