Epson L130 Waste Ink Counter Reset

The Epson L130 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L130 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson L130 Show ‘Service Required’?

Kunjungan servis sering kali tidak diperlukan. Wic Reset Connect allows a safe Epson L130 waste counter reset in minutes.

Three Steps to Restore Epson L130 Printing

1. Langkah 1: Connect Epson L130 to a Windows computer with a stable Internet connection using a USB cable.
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson L130.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson L130 to finalize.

Most Epson L130 waste counter resets finish in ~1–2 minutes.

Sebelum Anda Mulai

• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Windows 7/8/10/11 PC
• Koneksi Internet stabil selama pengaturan ulang
• Tombol reset Wic Reset yang valid Hubungkan tombol reset

Pemecahan masalah

• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Gunakan koneksi USB langsung (hindari hub).
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Tutup Epson Status Monitor atau utilitas printer lainnya.

Pertanyaan yang Sering Diajukan