Epson K300 Waste Ink Counter Reset

If your Epson K300 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson K300 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson K300 Show ‘Service Required’?

Dengan Wic Reset Connect, you can reset the Epson K300 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Bagaimana Kesalahan Muncul

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Reset Epson K300 Waste Ink Counter in 3 Steps

1. Langkah 1: Prepare a Windows PC + USB cable and connect Epson K300 directly. Keep Internet enabled for validation.
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson K300 is detected.
3. Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson K300.

Most Epson K300 waste counter resets finish in ~1–2 minutes.

Pemecahan masalah

• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Jalankan aplikasi sebagai Administrator.

Pertanyaan yang Sering Diajukan