Epson ET-2861 Waste Ink Counter Reset

If your Epson ET-2861 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson ET-2861 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson ET-2861 Ink Pad Counter Warning?

Dengan Wic Reset Connect, you can reset the Epson ET-2861 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Gejala Umum

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Three Steps to Restore Epson ET-2861 Printing

1. Langkah 1: Connect Epson ET-2861 to a Windows computer with a stable Internet connection using a USB cable.
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson ET-2861 is detected.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2861 to finalize.

Most Epson ET-2861 waste counter resets finish in ~1–2 minutes.

Apa yang Anda Butuhkan

• Windows 7/8/10/11 PC
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Koneksi Internet stabil selama pengaturan ulang

Jika Printer Tidak Terdeteksi

• Jalankan aplikasi sebagai Administrator.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Gunakan koneksi USB langsung (hindari hub).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Tutup Epson Status Monitor atau utilitas printer lainnya.

Pertanyaan yang Sering Diajukan