Model-specific reset guide

Epson EP-805AR Reset Waste Ink Counter

Epson EP-805AR records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.

Kunci reset$8,00
Instant email deliveryTermasuk dukungan teknisReplacement key after a failed reset
The problem

Before resetting Epson EP-805AR

An ink pad message is a maintenance safeguard. It indicates that Epson EP-805AR has reached a stored waste ink value that must be reset before normal printing can resume.

Wic Reset Connect is designed to reset the compatible counter in Epson EP-805AR. The physical waste ink system should still be inspected and maintained when necessary.

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
Kunci resetFor this operation
Step by step

Reset the counter in Epson EP-805AR

Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.

  1. Install the original driver

    Install the official Epson driver for EP-805AR and confirm that Windows can see the printer.

  2. Connect directly by USB

    Connect Epson EP-805AR to the computer without Wi-Fi, a hub or an adapter.

  3. Start Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EP-805AR.

  4. Enter the key and reset

    Enter the purchased key, choose Reset and keep the printer connected until completion.

Finish correctly: After the program confirms completion, close it, turn Epson EP-805AR off for about 10 seconds and switch it on again. The maintenance lock should be cleared.
If Epson EP-805AR is not detected
  • Try another USB port and a known data-capable USB cable if the printer is not detected.
  • Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
  • Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
  • Install the original Epson driver for EP-805AR; a generic Windows driver may not expose the required communication interface.

Open full instructions

Common questions

Epson EP-805AR reset FAQ

How long does the reset take?

The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.

What if the first reset attempt fails?

Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.

Does Epson EP-805AR need service mode?

No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.

Reset with confidence

Restore Epson EP-805AR

Complete the Epson EP-805AR counter reset with Wic Reset Connect and assistance whenever you need it.

Reset key: $8,00
Keranjang Belanja
Pilih mata uang Anda